Creep Feeder

Holds approximately 800 lbs; Panels constructed of 1" sq tubing frame, 4' tall x 6' long; Double-sided with adjustable calf walkthrough end panels

1000 gal Diesel Fuel Tank

12 ga single wall w/built-in skids.

STOCK PRO H2200 Hydraulic Chute

PREMIUM HYDRAULIC CHUTE

HONDA-POWERED GAS ENGINE OR 220V Hydraulic Chutes

ELECTRIC MOTOR; BUILT-IN PALPATION CAGE; 2200 LBS WEIGHT; 134" FRAME LENGTH; 53° FRAME WIDTH; 116" INSIDE LENGTH; 30.5" INSIDE WIDTH

1 Ton Bulk Feeder

DH bulk feed trailer (1 ton); 3.5k spring axle; Lights; Total height with top lid open is 8' 2

Pro works Pallet Forks

Heavy Duty; 48"; 5500 lbs; walkthrough or solid top

3pt bale spear -single

1- 49" spear w/stabilizers; 3x3" tubing 3/16" wall

DH HT08 tilt

8ft; hydraulic tilt 1580 lbs; HP: 75-150hp; comes with cylinders and hoses 1/4" back plate 3/8" side plates reversible cutting edge; replaceable adjustable side wear; Plates

Industrias America 2224x 3pt

8ft; 3pt; finish disk; 22" blades 1.5" disc shaft Greaseable bearings; 8" disc spacing; 3x3" tubing main frame 1/4" thickness; 4x3" on gang tubing 3/16" thickness; HP: 55 hp minimum 1750 lbs; 45" x 1.5" gang shaft/axle; CAT 2&3

3pt 7ft mower Industrias America

slip clutch 540PTP; gearbox rated for 125hp

M10F Industrias America

10ft 3pt; 540 PTO; Slip clutch; Gear boxes rated for 66-125HP; 3/16" sides 1/8" top plate; 2000lbs

DH non tilt

1/4" back plate; 5/16" side plate Reversible cutting edge; 10ft

DH HT10 Hydraulic tilt

1875 lbs; Replaceable cutting edge; 3/8" side plate; 1/4" back plate; 10ft

Industrias America 2228x

10ft; pull type finish disk; greaseable bearings; 1.5" gang shaft 22" blades come with cylinder and hoses; 3x4" frame tubing 1/4" thickness; 3x4" gang tubing 3/16" thickness; 9" disc spacing; 3000 lbs; HP: 65-70HP

Economy Plus Squeeze Chute

93.5" frame ht; 51.5" frame width; 1030 lbs

Industrias America F08 tilt

8ft; Hydraulic tilt; Light duty

Industrias America 170

7ft; 3pt; angle blade

Industrias America 10F Tilt

1/4" back plate; 5/16" side plate; Replaceable cutting edge 10ft

Single spear

1- 49" spear; 2 stabilizer spears; fits skid steer 3/16" wall tubing 4x3" tubing on bottom; 3x3" tubing on top; 1x2" rack tubing

Double spear

2-49" spears 30" spacing; fits universal/skidsteer; 4x3" tubing on bottom; 3x3" tubing on top; 3/16" wall; 5/16" side and mount plates

10ft concrete feed bunk

145 lbs; Has drain holes on both ends

Bale Unroller

3pt; 1 remote

Poly Hay Ring

Available with or without skirting.

Industrias America 6 disc

930 lbs; Levee plow (26" discs, 9" spacing); Center width adjustable, 18" - 36"; Outside width adjustable, 76" - 96"

6ft 3pt Disk

Greasable bearings; 890 lbs; 1.25" gang shaft etc.; Adjustable angle; 18" notched blades (5/32" thickness); -7" spacing; 2.5 x 2.5" frame tubing; 3 x 2" gang tubing, 1/4" thickness CAT 1

Industrias America grader blade

7x7" main frame tubing, 3/8 thick; 3600 lbs (Empty weight, no concrete weights included); 8x6" moldboard top tubing; 5x16" backplate; 30" tall moldboard including top tubing; 6"x 1/2" cutting edge, reversible; 5x24x2" angle cylinders; 4x10x2" lift cylinder; 4x8 tilt cylinder; 14L16-1 tires 12-ply; 90-200 HP rating